The Creality3D LD-002 MSLA 3D printer is an affordable entry-level product for the world of resin 3D printing. The Masked Stereolithography (MSLA) method uses an LCD display that systematically controls individual pixels and thus selectively hardens the resin present in the printer. This technology allows precise and fine objects to be created within a very short time. Since this technology can cure several parts of the printing area at the same time, the printing process is up to four times as fast as conventional stereolithography.
Intuitive operation thanks to 3.5-inch touch-screen and own software
The 3.5-inch full-color touch-screen enables a simple and simple operation of the printer. The display shows all the necessary information about the current print job, enables easy adjustments of the Z-height and allows you to pause print jobs. In addition, saved print jobs can be selected or deleted.
With the help of the specially developed 3D Creator slicing software, print jobs can be prepared in the shortest time and then transmitted to the printer. Print jobs can be conveniently sent to the printer over the network, and the status of the print can then be tracked over the network.
Easy to use with improved hardware
The LD-002 printer can be easily leveled using the calibration screws installed in the printing plate. A maintenance mode can illuminate the entire light unit. This will cause small pieces, which may accumulate in the resin tank, to harden and thus clean the resin tank. At the same time, the shift of the resin tank has been further improved so that the tank can be used longer. The printer display is also a high-quality model with a resolution of 2560 x 1440 pixels. This corresponds to a resolution of 47 micron in the X and Y direction.